Stainless Steel 316L Welded Round Tubing, 1/2″ OD, 0.46″ ID, 0.020″ Wall, 12″ Length

#ad
Eagle Stainless #ad - Round metal tubing for transport of fluids and gases in chloride environments. This welded and drawn round tubing meets american Society for Testing and Materials ASTM A269 specifications for quality assurance and is suitable for use in applications such as food and beverage preparation equipment in wash down environments.

Metal tubing, air, or solids, is used to transfer liquids, also called fractional tubing, and it is characterized by a round shape and a hollow center. Welded and drawn tubing, also known as "drawn over mandrel" DOM, is typically welded tubing that is drawn through a die and over a mandrel to create a smooth inner diameter, which gives the tubing comparable corrosion resistance to seamless tubing while still offering welded tubing's tighter wall tolerances.

Dual-certified 316/316l stainless steel for greater corrosion resistance than 304 stainless steel. Welded and drawn construction for a smoother bore than welded tubing and a more consistent wall thickness than seamless tubing. The tubing is annealed to restore formability for bending or flaring the tubing and has an operating temperature range of -325 to +1, 500 degrees F.

Stainless Steel 316L Welded Round Tubing, 1/2" OD, 0.46" ID, 0.020" Wall, 12" Length #ad - The tubing is welded and drawn for a smoother bore than non-drawn welded tubing and a more consistent wall thickness than seamless tubing. It is alloyed with molybdenum and has higher resistance to pitting and crevice corrosion in chloride environments than 304 stainless steel. Meets astm a269 specifications for quality assurance.

Welded tubing, is weaker than and not as rounded as seamless tubing, made by rolling and welding metal sheet stock, but it has a more consistent wall thickness for tighter wall tolerances.

#ad



18-8 Stainless Steel Round Shim, Unpolished Mill Finish, Annealed, Hard Temper, ASTM A666, 0.062" Thickness, 7/8" ID, 1-3/8" OD Pack of 10

#ad
Small Parts 188SS1399 #ad - Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Meets astm a666 specifications. Unpolished mill surface has no finish. 18-8 stainless steel round shim provides good resistance to corrosion and high temperatures. Shims are thin pieces of material placed between objects for a variety of uses, tighter seals, including added support, increased insulation, improved leveling, or better spacing.

Shapes include round, notched, and slotted. Standard tolerance. Hardness commonly measured as indentation hardness describes its resistance to permanent surface deformation. The 18-8 stainless steel material offers good resistance to corrosion and high temperatures. The 18-8 stainless steel round shim has an unpolished mill surface, meets American Society for Testing and Materials International ASTM A666 specifications, and has a standard tolerance.

18-8 Stainless Steel Round Shim, Unpolished Mill Finish, Annealed, Hard Temper, ASTM A666, 0.062" Thickness, 7/8" ID, 1-3/8" OD Pack of 10 #ad - It may be slightly magnetic. Corrosion resistance describes the material's ability to prevent deterioration caused by atmosphere, moisture, or other medium. They also can be used to fill gaps between machine parts that are prone to wear.

#ad



Greenlee 36414 Step Bit

#ad
Greenlee 36414 #ad - Unpolished mill surface has no finish. Meets astm a666 specifications. Hole sizes from 7/8" through 1-3/8" 18-8 stainless steel round shim provides good resistance to corrosion and high temperatures. Cut up through 3/8" mild steel, brass, aluminum, copper, wood, plastic and laminates. Standard tolerance. Step bit.

#ad



Greenlee 730-9/16 Knockout Punch Unit

#ad
Greenlee 730-9/16 #ad - Properly assembled through pilot holes, They will make clean, fast and accurate holes. Use with battery-powered, Hydraulic, ratchet or manual drivers. Standard tolerance. Slug falls free in die. Step bit. Round standard metal punch units are complete units consist of punch, die and draw stud. Can be used on mild steel up to 16 gauge.

Unpolished mill surface has no finish. Punch, die, draw stud contents; 16 gauge mild steel capacity; 9/16 inch hole size; round punch type; used on battery-powered/hydraulic/ratchet/manual driver 18-8 stainless steel round shim provides good resistance to corrosion and high temperatures. Meets astm a666 specifications.

#ad



Stainless Steel 304/304L Pipe Fitting, Close Nipple, Schedule 40 Welded, 1/2" NPT Male, 1-1/8" Length

#ad
Merit Brass VC0S2_4008-001 #ad - Can be used on mild steel up to 16 gauge. The fitting has NPT threads for creating tighter seals than straight threads. Fittings are available threaded or unthreaded, sizes, styles, in many shapes, and schedules pipe wall thickness. Nipple for connecting and extending pipes. Slug falls free in die. Made of stainless steel 304L, the lower carbon content of this pipe fitting ensures corrosion resistance.

Meets astm a666 specifications. Standard tolerance. Properly assembled through pilot holes, They will make clean, fast and accurate holes. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Unpolished mill surface has no finish. Meets standards astm a733, ansi b1.

Stainless Steel 304/304L Pipe Fitting, Close Nipple, Schedule 40 Welded, 1/2" NPT Male, 1-1/8" Length #ad - 201, and astm a312/sa312 for quality assurance. Family-owned since 1937, the company is based in Cleveland, OH. Step bit. Male national pipe Taper NPT threads for connecting female threaded pipes.

#ad



Horiznext Stainless Steel npt Compression Fitting, 1/2" Tube OD x 1/2 NPT Male Coupler in ss tubing

#ad
Horiznext #ad - Nipple for connecting and extending pipes. Properly assembled through pilot holes, They will make clean, fast and accurate holes. Unpolished mill surface has no finish. Slug falls free in die. Round standard metal punch units are complete units consist of punch, die and draw stud. Use with battery-powered, Hydraulic, ratchet or manual drivers.

This coupling is for a fixed connection between tubing and pipe made of stainless steel. Step bit. Ss tubing and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing fittings, as this will affect material type, size, consider the application, shape, and required durability.

18-8 stainless steel round shim provides good resistance to corrosion and high temperatures. Male national pipe Taper NPT threads for connecting female threaded pipes. Meets astm a666 specifications. Fittings are available threaded or unthreaded, sizes, in many shapes, styles, and schedules pipe wall thickness.

Horiznext Stainless Steel npt Compression Fitting, 1/2" Tube OD x 1/2 NPT Male Coupler in ss tubing #ad - Low carbon content to ensure greater resistance to corrosion. This steel tube coupler is made of chemically hardened type 304 stainless steel that provides higher strength and greater corrosion resistance than untreated stainless steel. Compression fittings do not require tools or sealants, and are useful in installations where a heat source, such as a soldering torch, is prohibited.

#ad



Precision Brand Smooth Band Metric Worm Gear Hose Clamp, 16mm - 27mm Pack of 10

#ad
Precision Brand 47185 #ad - The 9 mm band has a smooth form that helps provide even pressure around the hose, and an efficient seal at low torque. Unpolished mill surface has no finish. Step bit. The company, il, founded in 1946 and headquartered in Downers Grove, meets International Organization for Standardization ISO standard 9001.

Standard tolerance. Meets astm a666 specifications. 18-8 stainless steel round shim provides good resistance to corrosion and high temperatures. Nipple for connecting and extending pipes. Hose clamps are suitable for a large number of industries, and commonly used in industrial, electronic, and automotive applications.

Precision Brand Smooth Band Metric Worm Gear Hose Clamp, 16mm - 27mm Pack of 10 #ad - Precision brand products manufactures products such as hose clamps, punch and die sets, keystock, threaded rods, shims, and wire. Low carbon content to ensure greater resistance to corrosion. Pressed tooth form and rounded, raised band edges help prevent damage to the hose. Zinc-plated carbon steel screw resists rust.

The slotted, nut driver, 6mm hex-head screw allows installation using a blade screwdriver, or socket wrench. They come in a variety of designs and distribute uniform pressure over the circumference of hoses to bind them to fittings. The precision brand smooth band metric worm gear clamp has a stainless steel band and housing, and a plated steel screw, and is appropriate for use in critical hose connections.

#ad



Brennan N2404-08-08-SS Stainless Steel Compression Tube Fitting, Straight Adapter, 1/2" Tube OD x NPT Male

#ad
Brennan Industries, Inc. N2404-08-08-SS #ad - Push-to-connect fitting connects to pipes or tubing on one end and has an NPT male connector on the other. Series 400 stainless steel band helps provide resistance to corrosion and wear. Zinc-plated carbon steel screw resists rust. Slug falls free in die. Step bit. Round standard metal punch units are complete units consist of punch, die and draw stud.

The fitting is made of stainless steel for resistance to scaling and corrosion. Made of stainless steel 304L for strength. Push-to-connect compression fittings do not require tools or sealants, such as a soldering torch, and are useful in installations where a heat source, is prohibited. Male national pipe Taper NPT threads for connecting female threaded pipes.

Brennan N2404-08-08-SS Stainless Steel Compression Tube Fitting, Straight Adapter, 1/2" Tube OD x NPT Male #ad - Double ferrule fitting reduces possibility of leakage. Made of stainless steel for resistance to scaling and corrosion. Meets standards astm a733, ansi b1. 201, and astm a312/sa312 for quality assurance. This coupler fitting connects two pipes going in the same direction to extend a straight run. Pressed tooth form and rounded, raised band edges help prevent damage to the hose.

#ad



Anderson Metals Brass Garden Hose Fitting, Connector, 1/2" Barb x 3/4" Male Hose

#ad
Anderson Metals 07048-0812 #ad - Low carbon content to ensure greater resistance to corrosion. Hose fittings have various types of connections, dry disconnect, barbed, including threaded, push-to-connect, and others including those based on internationally-accepted specifications. Connects a hose on one end and a female GHT threaded connector on the other.

Can be used on mild steel up to 16 gauge. The company, is headquartered in Kansas City, founded in 1951, MO. Zinc-plated carbon steel screw resists rust. And its territories. Round standard metal punch units are complete units consist of punch, die and draw stud. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

Anderson Metals Brass Garden Hose Fitting, Connector, 1/2" Barb x 3/4" Male Hose #ad - Male national pipe Taper NPT threads for connecting female threaded pipes. This coupling has male garden hose threads GHT for connecting to a female GHT connector. Meets standards astm a733, ansi b1. 201, and astm a312/sa312 for quality assurance. Made of stainless steel for resistance to scaling and corrosion.

#ad



Stainless Steel 304 Cast Pipe Fitting, Full Coupling, MSS SP-114, 1/2" NPT Female

#ad
Merit Brass M411-08 #ad - Made of stainless steel 304 for strength. Merit brass distributes pipe fittings to the United States and Canada. This fitting meets standards MSS SP-114, ANSI B1. 201, and astm a351 for quality assurance. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules pipe wall thickness.

Coupler connects to tubing on one end and has an NPT male thread connector on the other. 1/2" outer diameter tube, 1/2" NPT male thread. Made of stainless steel 304, heavy duty, durable and corrosion resistance. Maximum working pressure of 20000 psi. Temperature range from -212 to +1472 degrees ℉. Pressed tooth form and rounded, raised band edges help prevent damage to the hose.

Stainless Steel 304 Cast Pipe Fitting, Full Coupling, MSS SP-114, 1/2" NPT Female #ad - These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U. S. A. Merit brass manufactures pipe nipples following ISO 9001 standards for quality assurance. Double ferrule fitting reduces possibility of leakage. Barbed fitting for a tight seal on hoses. Series 400 stainless steel band helps provide resistance to corrosion and wear.

#ad



10 ft. - Midwest Homebrewing and Winemaking Supplies PRECUT 1/2" ID Silicone Tubing

#ad
Midwest Homebrewing and Winemaking Supplies HOZQ8-1135 #ad - Pressed tooth form and rounded, raised band edges help prevent damage to the hose. Round standard metal punch units are complete units consist of punch, die and draw stud. Nipple for connecting and extending pipes. Low carbon content to ensure greater resistance to corrosion. Meets standards astm a733, ansi b1.

201, and astm a312/sa312 for quality assurance. Made of stainless steel 304 for strength. Female national pipe Taper NPT threads for connecting to male pipes. Smooth form band helps provide even pressure around the hose. Feature: 10 ft. High temp tubing. Zinc-plated carbon steel screw resists rust. Push-to-connect fitting connects to pipes or tubing on one end and has an NPT male connector on the other.

10 ft. - Midwest Homebrewing and Winemaking Supplies PRECUT 1/2" ID Silicone Tubing #ad - Series 400 stainless steel band helps provide resistance to corrosion and wear. Coupler for connecting two pipes in a straight run. 18-8 stainless steel round shim provides good resistance to corrosion and high temperatures. Connects a hose on one end and a female GHT threaded connector on the other. Male national pipe Taper NPT threads for connecting female threaded pipes.

#ad