Top 9 Jb Weld Plastic Bonder – Metal Filled Epoxies

As an Amazon Associate I earn from qualifying purchases.

1. J-B Weld

#ad

J-B Weld 8265S Original Cold-Weld Steel Reinforced Epoxy, 2 oz.

#ad
J-B Weld #ad - Cure and set time: after mixing the tubes at a 1:1 ratio, j-b weld original can be tapped, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, filled, sanded, molded and drilled. J-b weld original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel.

Will set in 4-6 hours, and cure in 16-24 hours. Waterproof, chemical, petroleum, and acid resistant when fully cured. Tensile strength is 3, 960 PSI. J-b weld original: the original cold weld two-part epoxy system that was designed as an alternative to torch welding. Perfect for diy household, marine, automotive, craft repair and much more. When fully cured, j-b Weld Original is waterproof and resistant to petroleum, chemical and acid. J-b weld delivers superior performance, and results for the World’s Strongest Bond.

Can be drilled, tapped, machined, filed, sanded and painted. Our heavy duty epoxy and adhesives repair & restore it right the first time. Stong and nontoxic after it has set and temperature resistant up to 500F. Versatile & dependable: j-b weld original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit 287 degrees Celsius. J-b weld original’s set and cure color is dark grey.
BrandJ-B Weld #ad
ManufacturerJBWeld #ad
Height8 Inches
Length0.3 Inches
Weight0.2 Pounds
Width5 Inches
Part Number8265S
Model8265S
WarrantyPlease Contact Seller for Product Warranty Information.

2. SPEC teck

#ad

Bonds and Cures in Seconds | Complete UV Welding Kit, FlashFix, UV Liquid Plastic Welder Kit

#ad
SPEC teck #ad - Kit includes: 8 grams of FlashFix Liquid Plastic, UV flashlight and batteries, alcohol wipes. Once activated, FlashFix quickly turns into a tough long lasting plastic weld. Once fully cured it can be sanded, painted and customized. Quick and easy repairs - use it to fill, arts & crafts, jewelry making, broken household items, or weld.

Designed to last - suitable for indoor and outdoor use. Works on a wide variety of materials and is a good alternative for applications where super glue and other bonding products may fall short. Flashfix contains no solvents and will not dry out or harden in the bottle. Our precision tip resists clogging and allows for accurate placement to avoid waste and messes. With an 8 gram bottle, sanding block for surface preparation, this is significantly more liquid plastic than most other products available today.

It is water resistant, works between -40°F and 300°F, and won’t yellow over time. Creates a strong durable bond - flashfix uses UV light to cure the liquid plastic which creates a strong, flexible bond within seconds. It will not bond or cure until you activate the adhesive with the UV light. Made in the USA. Cures in seconds - unlike traditional super glue and epoxy, you remain in control.
BrandSPEC teck #ad
ManufacturerSPECteck #ad
Part NumberFF1

3. Zhengmy

#ad

Brush and Screwdriver for Bumper Kayak, 6 Steel Mesh, Include 110V 80W Welder, Metal Bracket, 5 Foil Tape, 2 Welder Tips, 96 Rods 7 Types, Zhengmy Plastic Welding Repair Kit, Sandpaper

#ad
Zhengmy #ad - Versatile repair kit: you can use this soldering iron to heat or iron the surface of objects, drying and other applications involving high temperature heating; Plastic soldering kit can be applied for car bumpers, crack repair, kayaks, recycling bins, such as plastic melting, dashboards, canoes, heat shrinking, assault boats, fiberglass tubs, and even children's toys.

Easy to use: this plastic repair welder kit comes with a variety of plastic welding rods and other accessories that can be applied in different scenarios; Clean the surface of the object to be welded and select the correct electrode and tip, heat the torch and wait, then paste the repair. Time-saving and efficient design: polyethylene kayak repair kit is powerful, lightweight and portable, 80W welder heats up to a certain temperature in minutes; It heats up to 525°F 273°C for repairs or welding TPO, suitable for indoor and outdoor use; 110V, TEO and PP materials; Noet: basic safety precautions should always be followed when using electrical appliances.

Abundant welding kit: you will receive a plastic welding kit, 1 sandpaper, 2 sizes welding tips large and small, 5 foil tapes, including 1 plastic welder, 96 pieces 7 types plastic welding rods, 1 metal bracket, 6 stainless steel meshes, 1 metal brush and 1 screwdriver; Sufficient quantity and a complete set to meet your daily repair needs. Size information: plastic welder is about 25. 5 cm/ 1004 inch, polyurethane, nylon and polycarbonate; polypropylene have two size, ABS, polypropylene, covering the 7 most commonly applied plastic, another is 24.5 cm/ 9. 65 inch; the size of the aluminum foil strip is approx.
BrandZhengmy #ad
ManufacturerZhengmy #ad
Model1

4. J-B Weld

#ad

Clear, 50112-2 & 8276 KwikWeld Quick Setting Steel Reinforced Epoxy, Dark Grey 2 oz, Syringe, J-B Weld ClearWeld 5 Minute Epoxy, 2 Pack

#ad
J-B Weld #ad - Product 2: cure and set time: after mixing the tubes at a 1: 1 ratio, sanded, it takes 6 minutes to set and 4-6 Hours To Cure. Product 1: j-b weld clearweld: a clear, glass, ceramic, tile, quick setting and multipurpose two part epoxy that provides a strong and lasting bond on surfaces including metal, wood and more.

Kwikweld’s set and Cure Color Is Dark Grey. Product 2: surface applications: metal, Plastic & Pvc, Ceramic & Tile, Wood, Concrete, Fiberglass And More. When fully cured, kwikweld Is Waterproof And Resistant To Petroleum, Chemical And Acid. The unique syringe has a re-sealable cap that prevents drying out and leaking, most plastics, allowing for multiple uses. Product 1: cure and set time: after mixing the two part formula with the included mixing tray and stir stick, ClearWeld takes 5 minutes to set and 1 hour to cure.

Perfect for diy household, Craft Repair And Much More. J-b weld clearweld comes in a syringe allowing for an easy 1:1 mix ratio. Once cured, kwikweld can Be Tapped, Filled, Molded And Drilled. Product 1: strength: j-b weld ClearWeld has tensile strength of 3900 PSI. Product 2: versatile and dependable: j-b weld kwikweld is steel reinforced, has a tensile strength of 3127 Psi And Can Withstand Temperatures Up To 230 Degrees Fahrenheit 110 Degrees Celsius. J-b weld clearWeld set and cure color is clear.
BrandJ-B Weld #ad

5. Loctite

#ad

1, Syringe, 8.5 fl oz, Loctite Plastic Bonder

#ad
Loctite #ad - Dual syringe allows a precise mixture in every application. 2-part formula consists of resin and hardener. Resistant to water, solvents, moisture and impact. Repairs and bonds most plastic materials, including ABS, hard plastic, soft plastic, PVC and fiberglass. Permanent high bond strength.
BrandLoctite #ad
ManufacturerLoctite #ad
Height1.91 Inches
Length1.91 Inches
Width4 Inches
Part Number1363118
Model1363118
WarrantyNo

6. BONDIC

#ad

Bondic Pro UV Resin Kit Liquid Plastic Welding Kit, Plastic Repair for Home, Jewelry Glue Adhesive Epoxy Ultraviolet UV Glue for Glass Light, Super Glue

#ad
BONDIC #ad - Tired of dealing with traditional super glue drying out or sticking to your skin and clothes? Bondic's UV plastic repair kit stays liquid until cured by UV light, eliminating the risk of drying out in the container or welding your fingers together.

Once cured, bondic's non-toxic adhesive epoxy is 100% waterproof, heat-resistant and dries clear. Our uv resin glue kit empowers you to easily bond plastic, fabric, metal, rubber, and wood materials together in mere seconds. Instantly bond various materials. It can even be sanded and painted over for a seamless finish. Take it with you anywhere. Bondic's epoxy resin kit includes 3 tubes of uv resin glue, a compact UV LED light, cleaning cloth and a convenient travel case, making it easy to fix virtually anything while on-the-go.

Versatile liquid plastic welder. Bondic stays in liquid form until cured with the included UV LED light, allowing for molding and shaping of the material before setting to bond, fill and weld in ways traditional glue cannot. Extremely durable adhesive. Say goodbye to glue problems.
BrandBONDIC #ad
ManufacturerBondic #ad
Height2.2 Inches
Length8.4 Inches
Weight0.19 Pounds
Width4.2 Inches
Part NumberCECOMINOD032561
ModelCECOMINOD032561

7. Loctite

#ad

Syringe, 1, 0.85 fl oz, Loctite Epoxy Marine

#ad
Loctite #ad - Double syringe applicator: conveniently dispenses two-part formula resin and hardener in equal amounts to produce a tough, rigid, high-strength bond.

Bonds wet surfaces: permanent epoxy can be applied and cured underwater and ideal for projects requiring high bonding strength on surfaces exposed to water immersion. Versatile use: cures to a white finish ideal for repairing PVC, brass and galvanized pipes and bonds to metal, glass, ceramic, copper, fiberglass, concrete, wood and certain rigid plastics. Fast and easy: unique formula sets in just 2 hours and fully cures in 24 hours. Waterproof and resilient: does not shrink and is highly resistant to water, solvents, and large impacts and can be easily sanded or machined.
BrandLoctite #ad
ManufacturerLoctite #ad
Height8 Inches
Length1.38 Inches
Weight0.06 Pounds
Width3.88 Inches
Part Number1919324
Model1919324

8. JOUNJIP

#ad

Use with Plastic Welding Kit, JOUNJIP Reinforcing Stainless Steel Mesh for Bumper Kayak Thermoplastic Repairs

#ad
JOUNJIP #ad - Used to fabricate broken Plasstic Tabs, Fill Holes, and Provide Reinforcement. Stainless steel reinforcing Wire Mesh - 5" x 8 3/4". Designed to provide extra Strength When Used with Plastic Welder Repairing Bumpers and Kayaks.
BrandJOUNJIP #ad
ManufacturerJounjip #ad

9. MERWOF

#ad

MERWOF Upgraded 100W Plastic Welder Bumper Repair Kit, Hot Stapler Gun Plastic Welding Kit with 400PCS Hot Staples & Smoothing TipBlue

#ad
MERWOF #ad - Powerful - unlike other 50w/70w kits, make it heat up faster and save your time effectively. Easy to use - artificially designed handle is comfortable to grip. Multi-use - portable merwof 100w hot stapler plastic welder gun kit is a must-have plastic repair tool for home, help you fix and reinforce broken plastic parts instead of buying new, such as car bumper, boats, kayak, fenders, headlight fittings, 3d prints and automotive plasitc repair, garbage bins, motorcycles, and many other plastics.

All in a decent suitcase, easy to carry and store. The included scraper can be used to heat and smooth the plastic surface for better results. Unlike plastic rods, our hot stapler gun is equipped with 100W rate power motor, the metal staples will make the broken parts stronger than they were originally. Abundant - comes with 400pcs hot staples 4 types: wave, meet a variety of plastic repairs with different shapes.

After you do a lot of repairs, M and V, flat, you will find it very interesting to make broken plastic parts work again. Money saver! The head light illuminates when in use. Also perfect for handicraft. Simple operation, just press the button to heat and weld the staples into the plastic. If there is anything that you are not satisfied with, 110V US Power Adapter, 1*Plier, 1*Cutter, 400*hot Staples, 1*Suitcase, We will refund or replace without any questions.
BrandMERWOF #ad
ManufacturerMERWOF #ad
Part NumberMER-REPAIRTOOL-001
ModelMER-100Blue
Warranty1 Year Warranty